Copper weatherstripping installation

I have replaced that kind of copper have seen the brass as well weather stripping with new stuff of the same typeto satisfy the home owners desire to remain period compliant.

The new rubber collapsable weather stripping is much more energy efficient as well as maintenance free other than an occasional cleaning if needed.

The major problem with the copper type is getting clothing snagged and tearing the metal. And it can be noisy in high winds. Replace front door? Should I replace oxidized copper gutters? Barn door replacement questions. Advice on enhancements this copper artwork. Why does it need replacing? Perhaps you can just bend it back out to make greater contact with the door. It seems to be in good shape. I'm planning to replace the door and just assumed that weather stripping should be replaced.

I thought that there were probably superior products available now, but I don't want to get into a complex replacement project if what I have now is adequate. I made the mistatke of taking off the copper stripping and now cannot find any to replace it.

Anybody know where I can purchase it? I agree with this comment. I am only finding bronze spring weatherstripping. Copper is probably only available from specialized salvage yards. I am dealing with trying to remove paint some clown painters covered mine in. My house is and I'm trying to conserve it. So I don't want to damage them or replace them. Indem Sie weiterhin auf der Website surfen bzw. Mehr erfahren. Small-Space Living. Kitchen and Dining Seating. Living Room and Entryway Seating.

Sign In. Join as a Pro. Houzz TV. Houzz Research. Looking for the perfect gift? Send a Houzz Gift Card! Replace copper weather stripping for door? Email Save Comment 9. Featured Answer. Step 1: Clean surface where strips are to be placed.

Measure and cut strips to size with tin snips. Step 2: Put strips in place without removing backing paper. Mark spots for trimming for example, hardware points and where vertical and horizontal strips meet. Step 3: Peel off backing at one end and press strip in place, peeling and pressing as you work toward other end.

Here are the tools you'll want to have on hand to install self-sticking spring metal around doors:. Though not permanent, this type of weatherstripping can last from one to three years. Step 1: Select warm day to work, if possible. Adhesive forms a better bond if applied when temperature is at least 60 degrees Fahrenheit. Step 2: Clean surface where weather stripping is to be attached with detergent and water.

Make sure no dirt or grease remains. If pressure-sensitive weather stripping had been previously installed, use petroleum jelly to remove any old adhesive. Dry surface with rags. Step 4: Starting at one end, slowly peel paper backing as you push sticky foam strips into place. If backing proves stubborn at beginning, stretch foam until seal between backing and foam breaks.

Step 6: Attach other two strips to doorstop. If corner of door catches weather stripping as you close it, trim top piece of foam on hinge side. Serrated-metal weather stripping, usually with a felt-strip insert running the length of the serrated groove, also can be used to seal air gaps around doors.

To install this type of weather stripping, measure the length of strips required, and then use tin snips or heavy-duty scissors to cut the serrated-metal material to the proper lengths. Nail each strip at both ends, add a nail to the center of each strip, and drive additional nails every 2 to 3 inches along the rest of the strip.

Here are the tools you'll need to install pressure-sensitive foam weather stripping around doors:. The gap at the bottom of the door is treated differently from the gaps on the sides and along the top.

The wood or metal hump on the floor along the bottom of the door is called the threshold. Many of the metal types feature a flexible vinyl insert that creates a tight seal when the door closes against it.

Other thresholds consist of one unit on the floor and a mating piece on the bottom of the door. These two pieces interlock to form a weathertight barrier. In most cases, the threshold with a flexible vinyl insert is the easiest to install. Interlock systems are quite effective when properly installed, but they require a perfect fit or they will not work satisfactorily.

Wooden thresholds often wear down to the point where they must be replaced. This is an easy installation, and there are many types of replacement thresholds from which to choose. Most are aluminum and come in standard door widths; however, if your door is not standard width, you can trim the aluminum threshold with a hacksaw.

Here's how to install a replacement threshold:. Step 1: Remove old threshold. If it is wood, there are two ways to remove it. In most cases, you can pry it up after removing doorstops with small flat pry bar or putty knife, but you must work carefully and slowly.

If jamb itself rests on threshold, saw through old threshold at each end. Use backsaw placed right against jamb, and saw down through threshold, being careful not to scar floor. Once you make cuts, threshold should be easy to pry up. If prying doesn't work, use chisel and hammer to split piece.

Metal thresholds are frequently held down by screws concealed under vinyl inserts. Once you remove screws, threshold will come up easily. Step 2: Install replacement threshold by driving screws through metal unit and into floor. If you don't want aluminum threshold, cut replacement from wood, using original one as pattern. Step 3: Install door sweep to seal gap.

Most sweeps are attached to inside of door with nails or screws. Cut sweep to size, and close door. Tack both ends of sweep to door, then install remaining nails or screws. If you are using screws, drill pilot holes first. Some types of sweeps slip under the door and wrap around the bottom. Still another type fits on the outside, with a section of it flipping upward to miss the threshold when the door is opened. When the door is closed, this section flips back down to provide a seal against the threshold.

You can adjust this type of door sweep so it renders a snug fit. Weather-stripping and weatherproofing your doors -- and the rest of your home -- can help keep you comfortable when the weather is inclement. And the good news is that you can make these improvements to your home without having to call a professional. Here are the tools you'll want to have to make a weathertight threshold around doors:. Sign up for our Newsletter! Mobile Newsletter banner close.

Mobile Newsletter chat close. Mobile Newsletter chat dots. Mobile Newsletter chat avatar. Mobile Newsletter chat subscribe. Home Improvement. Home DIY. Home Repairs. How to Install Weather Stripping. Types of Weather Stripping " ". Interlocking metal weather stripping can provide a secure seal as long as the separate pieces fit together as they should. Installation is tricky, and maintenance requires careful examination for bent pieces.

How to Install Weather Stripping " ". Apply pressure-sensitive types of weather stripping only on the friction-free parts of a wooden window. What You'll Need. Dish detergent Clean rags Petroleum jelly Scissors.

Read More. Flare the edge of a spring-metal strip with a screwdriver to render a snug fit. Self-Sticking Spring Metal Self-sticking spring metal has a peel-and-stick backing. Here's how to install this self-sticking spring metal weather stripping: Step 1: Measure and cut strips to fit window, then clean surface where strips are to be placed.

Tape measure Pencil Scissors Dish detergent Clean rags. Tubular and Foam-Filled Gasket Weather Stripping Generally, the only kind of weather stripping that can be applied to metal windows is the pressure-sensitive type. Tape measure Pencil Scissors Hammer Nails. How to Install Weather Stripping Onto Sliding Windows and Doors Installing weather stripping onto sliding windows and doors presents some unique challenges. Installing Weather Stripping Onto Sliding Windows Sliding windows, those in which the sash moves laterally, come in both wood and metal frames.

Applying Spring-metal Strips Spring-metal strips V-shape or single are available in bronze, copper, stainless-steel, and aluminum finishes. Here's how to install spring-metal weather stripping around a door: Step 1: Measure and cut spring-metal strips to size. To install the self-sticking spring metal around a door, follow these steps: Step 1: Clean surface where strips are to be placed.

Dish detergent Clean rags Tape measure Pencil Tin snip. Applying Pressure-sensitive Foam " ". Seal the top and sides of a door with adhesive-backed foam weather stripping. To install the foam, peel off the backing and stick the strip down. Attach strips of pressure-sensitive foam on the hinge side of the doorjamb and on the doorstop. The adhesive backing on the foam will form a secure bond only when applied to a clean, grease-free surface. Creating A Weathertight Threshold " ".

Bronze weatherstripping is extremely effective and durable enough to last generations. There are several types of metal weather stripping. Some are more complicated than others and require modifications to the doors or windows.

Leave those to the pros. For the average homeowner, spring bronze weatherstripping will be just as effective and it is user-friendly to install. Measure the door openings and using tin snips cut the weatherstripping to length. The weatherstrip needs to go in the rabbet that the door fits into when closed.

There is a flat side and sprung side to spring bronze. The flat side goes on the interior and the sprung side faces the exterior so that the door compacts it as it closes. Line up your spring bronze and nail it in from the top down. Make sure you start from one end and keep the bronze straight the whole length so it does not bubble or bind in places. Also, be careful not to nail the bronze too close the the door jamb see spacing in photo or it may not be able to lay down completely when compressed.

The nails should be flush with the surface. Run your fingers across them and if you feel any that are standing a bit proud, set them a bit more with a nail set. Depending on how tight the existing door is in the frame, you may need to increase the spring angle on the weatherstripping. Use a putty knife or screwdriver to gently bend the bronze to increase the tightness of the fit.

Close the door and check for any gaps where you can see sunlight.